youcutai

How to Restore Old Photos

Updated Sep 2, 2026 · 8 min read

Start with a good scan, not a phone snapshot

Restoration can only recover what the digital file contains. The single biggest quality lever is how you digitise the print.

Use a flatbed scanner if you can. Set it to 600 dpi for prints up to 4 x 6 in, and 1200 dpi for small prints, contact sheets or negatives. Scan in colour even for black-and-white photos, because the yellow and brown tones carry information the restoration model uses. Turn off the scanner's own dust removal, sharpening and auto-colour; they smear detail that the AI would otherwise use.

If you only have a phone, place the photo on a flat matte surface near a window with indirect light, shoot straight down with the main camera, no flash, and fill the frame. Avoid the glare from glossy prints by angling slightly and shooting in the shade. Use a scanning app that removes perspective distortion, or crop and straighten carefully. Expect a phone capture to give slightly softer results than a real scan.

Do not clean the print with water or solvents. Blow off loose dust with a bulb blower. Physical damage that is already there can be repaired digitally; damage you add cannot.

Save the scan as TIFF or maximum-quality JPEG and keep this file untouched as your archive copy.

Step 1: Assess the damage and pick a mode

Look at the scan at 100 % and note what is wrong. Then choose in the Photo Restoration tool:

  • Restore (2 credits) fixes scratches, tears, creases, dust spots, mould marks, fading, blur and low resolution, and rebuilds facial detail. It keeps the original tones, so a sepia photo stays sepia. Choose this when the photo is colour already or when you want an honest archival repair.
  • Colorize (2 credits) adds colour to a black-and-white or sepia photo without other repairs. Choose this only if the scan is already clean.
  • Restore + Colorize (3 credits) does both in one pass, and is the right choice for most family photos from before the 1970s.

Some honest expectations. Small tears and scratches vanish completely. Large missing corners are filled with plausible content, which is fine for a wall or a sky but is invention if it is part of a person. Faces that are badly blurred will be reconstructed, and the result will be a face that looks like the person but may not be exact; compare against other photos of the same relative if you have them.

Always start with the free preview and compare before spending credits.

Step 2: Run restoration and inspect the faces

Upload the scan, select the mode and click Restore. Processing takes 10 to 30 seconds depending on size. The before/after slider opens.

Inspect in this order:

  1. Faces first. Eyes should be sharp with visible catchlights, skin should have texture rather than a smooth plastic sheen, and the expression must match the original. If a face looks like a different person, the source was too degraded for confident reconstruction; try again from a higher-resolution scan, or accept a softer result by running only the Photo Enhancer instead.
  2. Damage areas. Tears and scratches should be gone without a visible seam. Check that a repaired line through a face did not leave a slight discontinuity in the eyebrow or lip.
  3. Fine detail. Lace, hair, jewellery, text on signs. The model should sharpen these, not simplify them.
  4. Edges and borders. Deckled photo borders and handwriting on the border are usually preserved. If you want the border gone, crop first.

Group photos with many small faces are the hardest case. If the wide shot is important, restore it once for the overall image, then crop each face at high resolution and restore those crops separately for individual prints.

Step 3: Colorize with care

Colorization is an educated guess. The model knows that skin, sky, grass and wood have typical colours, but it cannot know that your grandmother's dress was green rather than blue. Treat the result as an interpretation, not a record.

Ways to make it more accurate:

  • Add a hint. The colorize mode accepts an optional short note such as red brick house, navy uniform, blonde hair. Two or three facts about the most prominent objects steer the whole image.
  • Compare with known references. Military uniforms, school colours, car models and product packaging often have documented colours.
  • Watch for bleeding. Colour that spills from a jacket onto the hand holding it, or a green cast on a face near foliage, is the most common defect. Re-run; the second sample often differs.
  • Keep the mono version too. Many families prefer to frame the restored black-and-white photo and keep the colour version for digital sharing.

Colorized output is delivered at the same resolution as the input. If you want a large print, upscale afterwards with the Image Upscaler rather than before, so the colour model works on the cleanest, most compact version of the image.

Step 4: Upscale and print

A 600 dpi scan of a 3 x 5 in print is about 1800 x 3000 px, which prints well at 6 x 10 in. To go larger, run the restored file through the Image Upscaler at 2x (1 credit) or 4x (2 credits). Leave enhance faces off; the restoration step has already rebuilt the faces and a second pass tends to over-smooth them.

For printing, export as a high-quality JPEG or TIFF in sRGB. Lustre or matte paper hides remaining grain better than glossy. If the photo will be framed behind glass, a slight increase in contrast compensates for the reflection.

Costs for a typical family photo: 3 credits for Restore + Colorize and 1 to 2 for upscaling, so 4 to 5 credits, or roughly $0.15 on a Pro plan. A shoebox of 100 photos is around $15, which compares well with $10 to $50 per photo at a professional restoration studio, though a studio is still the right choice for museum-grade or heavily damaged one-of-a-kind prints.

Keeping the restoration honest

AI restoration is powerful enough to change history by accident. A few habits keep family archives trustworthy:

  • Archive the original scan unmodified, and name restored files clearly (grandpa-1952-restored.jpg).
  • Do not remove people or objects from historical photos in the archive copy. Make a separate edited version if you want one for display.
  • Note colorization as such when sharing; relatives may otherwise remember colours that were never real.
  • Be cautious with heavy face reconstruction on the only surviving photo of someone. A slightly soft but genuine face is worth more than a sharp approximation.

Used this way, restoration gives you prints you can hang and files you can share, without replacing the record itself.

Frequently asked questions

Can it fix a photo that is torn in half?+

Yes, if you scan both halves together aligned on the scanner glass. The Restore mode fills the tear line and rebuilds detail across it.

Will colorization be accurate?+

It is a plausible estimate, not a record. Add a short hint about known colours to improve accuracy, and keep the original black-and-white version.

What resolution should I scan at?+

600 dpi for standard prints, 1200 dpi for small prints or negatives. Scan in colour with all scanner enhancements turned off.

How much does restoring one photo cost?+

Restore or Colorize is 2 credits each; Restore + Colorize is 3 credits. That is roughly $0.10 per photo on a Pro plan, and the preview is free.

← All guides

Tools mentioned